Sprinkler system installation is important to ensure that you are not putting yourself in danger. Most people think that they are not going to put in a lot of time and effort into the system themselves, but in reality it is one of the most important things you can do for your home. Not having a sprinkler system at all or having one that isn’t working correctly can be as bad as not having a heating or cooling system at all. There are many sprinkler system installation tips that will help make sure that you get it installed properly the first time.
One of the first things you need to do before you install the system is to prepare the area where it will be installed. You need to clear a safe area where you will be working without interruption. Make sure that you have marked the area where the sprinkler head will be placed so that it is easily accessible.
The next thing you need to do is go ahead and turn off the water from the main line to where the sprinkler head will be installed. Once the water is turned off, take the hose that you were using to water the plants and the grass and hose it towards the sprinkler head. You will need at least two feet of water to get the sprinkler head started. Once the head is turned on, you need to wait for it to get ready itself. Most sprinklers will start as soon as you turn on the water.
After it has started, you then need to check to see if the sprinkler head is still within reach. You do this by looking through the sprayer head to see if it is at the correct height. If it is not level, you need to adjust it. Most people do not realize that the sprinkler is much lower than it looks. If it is not level, you will have to walk up to the sprinkler and pull it up a few inches to make sure that the water is spraying towards the right direction.
Once the sprinkler head is within reach, you can then start to slide it in and secure it. To do this, you will need to unscrew the bolts that hold it in place. Then you can just slide it in and screw it back in. Once you have done that, you can start to test the sprinkler to see how it is working. You do this by turning the switch on and off to see if the water comes out the sides properly.
After you have done all of your testing and adjustments, it is time to move on to the actual installation. The first thing you will want to do is secure the sprinkler head on top of the bracket. To do this, you will need to either use an adjustable cable that comes with the sprinkler, or something else to hold the head in place. Make sure that the bracket on the sprinkler is secure before you continue.
Next, attach the cable to the sprinkler itself. Slide it through the holes on the sprinkler head until it is plugged into the wall. Finally, install the screws and put everything back together. Check your brackets to ensure that they are not bent. If they are, replace them.
Installing a new sprinkler system can be tricky at times. However, following these steps will help you make it as easy as possible. Once you learn how things work, it will be easier to go out and purchase replacements or upgrade components when needed. sprinkler system installation is important, but you do not have to put it off.